ARREDAMENTO INOX

Made of stainless steel. Bolted frame for self-assembly, allowing for easy transport and storage. The worktop is filled with a waterproof and soundproof laminate panel. Approximate load capacity on the worktop: 70 kg/m2. Legs made of 40 x 40 mm profiles. Adjustable feet between +25/-5 mm. Access to the workspace from all sides. Unfilled lower shelf, positioned 160 mm from the floor, non-adjustable, welded.

Ideal for keeping foodservice appliances clean. Suitable for cleaning any oven chamber: convection ovens, combi ovens, fryer tubs, griddles, worktops, as well as any appliance or part that can be washed with a jet of water. A long 2-meter hose reaches any appliance within its range. The ergonomic handle with drain valve is comfortable to hold. A dedicated socket can be positioned on the oven casing (as directed by the technician) or on the wall using 3 screws. The jet uses a filter that increases the cleaning area covered. Ideal for water temperatures from 5°C to 85°C. Maximum water flow rate up to 11 l/m at a pressure of 3 bar. Recommended feed water pressure: 3 bar. Feed water operating pressure: 0.5-7 bar. PA66 nylon housing, corrosion-resistant chromium-plated steel parts. Water supply valve connection: ½".

Made of stainless steel. Single hole, swivel spout. Flow control. Shower length: 120 cm. Required table opening: 32 mm. Connection hoses: 3/8", length: 350 mm. Spout range: 230 mm. Faucet height: 230 mm.

Made of stainless steel. High-pressure water flow resistant shower. Separate traditional wall connection for hot and cold water, swivel spout. Plastic screen. Wall-mounted handle that can be shortened. Tap height: 1010 mm.

Polished stainless steel housing. Single-hole, rotating spout. Flow control. Required table opening: 30 mm. Connection tubes: 3/8", length: 350 mm. Tap height: 445 mm.

Container exterior made of 0.8 mm thick satin stainless steel. Container interior made of 0.8 mm thick polished 18/8 stainless steel. Lid made of 0.6 mm thick satin stainless steel. Equipped with 2 ergonomic insulated handles, each secured with 7 welds. The insulated lid has a handle and an air release valve for easy opening. The lid gasket is profiled and removable for easy cleaning. The lid is securely closed with 6-8 latches, depending on the capacity size. The bottom is equipped with a black rubber edge, protecting the container and allowing multiple containers to be stacked on top of each other. Designed for catering companies to keep food and liquids warm. Maintains contents at temperature for up to 6 hours. Stackable. Stainless steel tap. Spool positioned approximately 45 mm.

Container exterior made of 0.8 mm thick satin stainless steel. Container interior made of 0.8 mm thick polished 18/8 stainless steel. Lid made of 0.6 mm thick satin stainless steel. Equipped with 2 ergonomic insulated handles, each secured with 7 welds. The insulated lid has a handle and an air release valve for easy opening. The lid gasket is profiled and removable for easy cleaning. The lid is securely closed with 6-8 latches, depending on the capacity size. The bottom is equipped with a black rubber edge, protecting the container and allowing multiple containers to be stacked on top of each other. Designed for catering companies to keep food and liquids warm. Maintains contents at temperature for up to 6 hours. Stackable. Stainless steel tap. Spool positioned approximately 45 mm.

Container exterior made of 0.8 mm thick satin stainless steel. Container interior made of 0.8 mm thick polished 18/8 stainless steel. Lid made of 0.6 mm thick satin stainless steel. Equipped with 2 ergonomic insulated handles, each secured with 7 welds. The insulated lid has a handle and an air release valve for easy opening. The lid gasket is profiled and removable for easy cleaning. The lid is securely closed with 6-8 latches, depending on the capacity size. The bottom is equipped with a black rubber edge, protecting the container and allowing multiple containers to be stacked on top of each other. Designed for catering companies to keep food and liquids warm. Maintains contents at temperature for up to 6 hours. Stackable. Stainless steel tap. Spool positioned approximately 45 mm.

Container exterior made of 0.8 mm thick satin stainless steel. Container interior made of 0.8 mm thick polished 18/8 stainless steel. Lid made of 0.6 mm thick satin stainless steel. Equipped with 2 ergonomic insulated handles, each secured with 7 welds. The insulated lid has a handle and an air release valve for easy opening. The lid gasket is profiled and removable for easy cleaning. The lid is securely closed with 6-8 latches, depending on the capacity size. The bottom is equipped with a black rubber edge, protecting the container and allowing multiple containers to be stacked on top of each other. Designed for catering companies to keep food and liquids warm. Maintains contents at temperature for up to 6 hours. Stackable. Stainless steel tap. Spool positioned approximately 45 mm.

Container exterior made of 0.8 mm thick satin stainless steel. Container interior made of 0.8 mm thick polished 18/8 stainless steel. Lid made of 0.6 mm thick satin stainless steel. Equipped with 2 ergonomic insulated handles, each secured with 7 welds. The insulated lid has a handle and an air release valve for easy opening. The lid gasket is profiled and removable for easy cleaning. The lid is securely closed with 6-8 latches, depending on the capacity size. The bottom is equipped with a black rubber edge, protecting the container and allowing multiple containers to be stacked on top of each other. Designed for catering companies to keep food and liquids warm. Maintains contents at temperature for up to 6 hours. Stackable. Stainless steel tap. Spool positioned approximately 45 mm.

Container exterior made of 0.8 mm thick satin stainless steel. Container interior made of 0.8 mm thick polished 18/8 stainless steel. Lid made of 0.6 mm thick satin stainless steel. Equipped with 2 ergonomic insulated handles, each secured with 7 welds. The insulated lid has a handle and an air release valve for easy opening. The lid gasket is profiled and removable for easy cleaning. The lid is securely closed with 6-8 latches, depending on the capacity size. The bottom is equipped with a black rubber edge, protecting the container and allowing multiple containers to be stacked on top of each other. Designed for catering companies to keep food and liquids warm. Maintains contents at temperature for up to 6 hours. Stackable. Stainless steel tap. Spool positioned approximately 45 mm.

For automatic assembly, designed for sink placement. Suitable for glasses with a diameter of 50-140 mm and a maximum height of 240 mm, including German Stein beer glasses (with ear) or English pint glasses. ABS housing, polypropylene brush bristles. The central brush is removable. Equipped with a rinsing system inside one of the containers, it has jets for rinsing glasses, spraying inside and outside of glasses simultaneously. With a direct water connection: effectively rinses glasses in cold water (below 30°C). In case of overflow, useful when excess water reaches the brushes. Equipped with 4 PVC suction cups for stability. Included in the set: 3/8" water supply hose, length 70 cm.

Plastic. With 3 nylon brushes. Bottom with 4 suction cups.

Plastic. With 3 nylon brushes. Bottom with 4 suction cups.

Made of stainless steel. Effectively filters food debris to prevent drain blockages. Dishwasher safe.

Aluminum. With nylon brush. Bottom with 4 suction cups.

Heating system with thermal coil. This guarantees 20% energy savings compared to traditional solutions, as well as uniform temperature distribution. Stainless steel housing and water tank. Compatible with one GN 1/1 container with a maximum height of 150 mm. Also suitable for combinations of smaller GN containers, such as two GN 1/2 or three GN 1/3. The positioning of GN 1/6 containers is possible provided that an adapter bar is used (not included in the set, can be purchased separately – codes: 808153, 808108). Temperature range: 30 °C to 85 °C. Temperature regulated with a knob – 6 heating levels. Equipped with a thermostat and indicator light. Water tank with minimum and maximum water level indicators. Overheat protection. Protection class: IPX3. GN containers are not included in the set.

Heating system with thermal coil. This guarantees 20% energy savings compared to traditional solutions, as well as uniform temperature distribution. Stainless steel housing and water tank. Compatible with one GN 1/1 container with a maximum height of 150 mm. Also suitable for combinations of smaller GN containers, such as two GN 1/2 or three GN 1/3. The placement of GN 1/6 containers is possible provided that an adapter bar is used (not included in the set, can be purchased separately – codes: 808153, 808108). Temperature range: from 30 °C to 85 °C. Temperature regulated with a knob – 6 heating levels. Equipped with a thermostat and indicator light. Water tank with minimum and maximum water level indicators. Overheat protection. Protection rating: IPX3. Included in the set: - 3 GN 1/3 containers with a maximum height of 150 mm. 100 mm.- 3x GN 1/3 lid.

Made of high quality stainless steel (AISI 430). Reinforces the worktop and is equipped with a 40 mm support for splash protection, extended load capacity: ≈70 kg/m2. The integrated sink (AISI 304) measures 400x400x(H)250 mm. It comes with a pre-drilled ø30 mm tap hole. The reinforced shelf measures 575x585 mm and is non-adjustable. The legs are height-adjustable to ensure a horizontal installment (+25/-5 mm). Delivered flat-packed, assembly required. Versions available for left and right installation.

Made of high quality stainless steel (AISI 430). Reinforces the worktop and is equipped with a 40 mm support for splash protection, extended load capacity: ≈70 kg/m2. The integrated sink (AISI 304) measures 400x400x(H)250 mm. It comes with a pre-drilled ø30 mm tap hole. The reinforced shelf measures 575x585 mm and is non-adjustable. The legs are height-adjustable to ensure a horizontal installment (+25/-5 mm). Delivered flat-packed, assembly required. Versions available for left and right installation.

Very easy to use, clean and even maintain. Perfect for washing cups, glasses, cutlery, plates. Electromechanical controls. AISI 304 stainless steel housing. Stainless steel paddles for separate washing and rinsing. Double-sided door in solid color. Number/duration of wash cycles: 1/120 s. Capacity: up to 30 baskets/h. Water consumption per cycle: 2-2.5 l (depending on water pressure). Wash water temperature: 62 °C, rinse water temperature: 85 °C. Boiler (capacity/power): 3.5 l/2.5 kW. Tank (capacity/power): 17 l/2.5 kW. Pump power: 0.1 HP. Safety thermostat for boiler/tank up to 105°C/99°C. Protection class IP44. Weight 39 kg. EQUIPMENT: - 1 universal basket 400x400x(H)150 mm for glasses - 1 basket with pins 400x400x(H)110 mm for plates - 1 cutlery basket 110x110x(H)130 mm - length of water inlet hose 1.5 m with internal connection thread 3/4" - length of drain hose 2 m Ø 25 mm - power cable without plug - rinse aid dispenser Ready for installation of the detergent pump (screws in the rear wall of the tank). Vertical Adjustable legs: ≈10 mm, Ø 40 mm.

Very easy to use, clean and even maintain. Perfect for washing cups, glasses, cutlery, plates. Electromechanical controls. AISI 304 stainless steel housing. Stainless steel paddles for separate washing and rinsing. Double-sided door in solid color. Number/duration of wash cycles: 1/120 s. Capacity: up to 30 baskets/h. Water consumption per cycle: 2-2.5 l (depending on water pressure). Wash water temperature: 62 °C, rinse water temperature: 85 °C. Boiler (capacity/power): 3.5 l/2.5 kW. Tank (capacity/power): 17 l/2.5 kW. Pump power: 0.1 HP. Safety thermostat for boiler/tank up to 105°C/99°C. Protection class IP44. Weight 39 kg. EQUIPMENT: - 1 universal basket 400x400x(H)150 mm for glasses - 1 basket with pins 400x400x(H)110 mm for plates - 1 cutlery basket 110x110x(H)130 mm - length of water inlet hose 1.5 m with internal connection thread 3/4" - length of drain hose 2 m Ø 25 mm - power cable without plug - rinse aid dispenser Ready for installation of the detergent pump (screws in the rear wall of the tank). Vertical Adjustable legs: ≈10 mm, Ø 40 mm.

Very easy to use, clean and even maintain. Perfect for washing cups, glasses, cutlery, plates. Electromechanical controls. AISI 304 stainless steel housing. Stainless steel paddles for separate washing and rinsing. Double-sided door in solid color. Number/duration of wash cycles: 1/120 s. Capacity: up to 30 baskets/h. Water consumption per cycle: 2-2.5 l (depending on water pressure). Wash water temperature: 62 °C, rinse water temperature: 85 °C. Boiler (capacity/power): 3.5 l/2.5 kW. Tank (capacity/power): 17 l/2.5 kW. Pump power: 0.1 HP. Safety thermostat for boiler/tank up to 105°C/99°C. Protection class IP44. Weight 39 kg. EQUIPMENT: - 1 universal basket 400x400x(H)150 mm for glasses - 1 basket with pins 400x400x(H)110 mm for plates - 1 cutlery basket 110x110x(H)130 mm - length of water inlet hose 1.5 m with internal connection thread 3/4" - length of drain hose 2 m Ø 25 mm - power cable without plug - rinse aid dispenser Ready for installation of the detergent pump (screws in the rear wall of the tank). Vertical Adjustable legs: ≈10 mm, Ø 40 mm.

Made of durable stainless steel, with a 510 mm wide basket guide, integrated sink (400 x 400 mm) and stand. Equipped with a lock for connecting the table to dishwashers with hoods. The legs are height-adjustable to ensure leveling (+25/-5 mm). Delivered flat-packed, requires assembly. Versions available for left- and right-hand installation.

Made of durable stainless steel, with a 510 mm wide basket guide, integrated sink (400 x 400 mm) and stand. Equipped with a lock for connecting the table to dishwashers with hoods. The legs are height-adjustable to ensure leveling (+25/-5 mm). Delivered flat-packed, requires assembly. Versions available for left- and right-hand installation.

Very easy to use, clean and even maintain. Perfect for washing cups, mugs, glasses, cutlery, plates. Electronic controls. AISI 304 stainless steel housing. Separate stainless steel wash and rinse arms. Double-covered door in solid color. Safety thermostat for boiler/tank up to: 105 °C/99 °C. Electronic thermometer for boilers and tanks. Pump sealing factor: IP 44 ø40 mm feet, ≈10 mm in height adjustable FUNCTIONS: Glass washer chamber cleaning program. “SOFT START” function: the water pump is started at a lower pressure to gradually increase the pressure to avoid damaging fragile dishes. Cold rinse function: ideal for washing glasses. BENEFITS OF COLD RINSE: Cools glasses after cleaning, making them immediately ready for use. Removes the odor of the rinse aid, ideal for wine glasses.EQUIPMENT:1 universal basket 400x400x(H)150 mm for glasses.1 basket with pins 400x400x(H)150 mm for plates.1 cutlery basket 110x110x(H)130 mm.Length of water supply hose 1.5 m, with 3/4" internal connection thread.Length of drain hose 1.5 m, Ø24 mm.Power cable without plug.

Very easy to use, clean and even maintain. Perfect for washing cups, glasses, cutlery, plates. Electromechanical controls. AISI 304 stainless steel housing. Stainless steel paddles for separate washing and rinsing. Double-sided door in solid color. Number/duration of wash cycles: 1/120 s. Capacity: up to 30 baskets/h. Water consumption per cycle: 2-2.5 l (depending on water pressure). Wash water temperature: 62 °C, rinse water temperature: 85 °C. Boiler (capacity/power): 3.5 l/2.5 kW. Tank (capacity/power): 17 l/2.5 kW. Pump power: 0.1 HP. Safety thermostat for boiler/tank up to 105°C/99°C. Protection class IP44. Weight 39 kg. EQUIPMENT: - 1 universal basket 400x400x(H)150 mm for glasses - 1 basket with pins 400x400x(H)110 mm for plates - 1 cutlery basket 110x110x(H)130 mm - length of water inlet hose 1.5 m with internal connection thread 3/4" - length of drain hose 2 m Ø 25 mm - power cable without plug - rinse aid dispenser Ready for installation of the detergent pump (screws in the rear wall of the tank). Vertical Adjustable legs: ≈10 mm, Ø 40 mm.

Complete meat mincer set. Aluminum bowl, auger, and tray. Stainless steel blade and 3 grinding plates. PP pusher. PP and POM filling kit. Grinding plates with 3, 5, and 7 mm diameter holes. 43 mm diameter feed tube. Set includes: mincer, food pusher, removable tray, filling kit, blade, and 3 grinding plates. Accessory only compatible with HENDI Blackbolt (code: 221570).

Stainless steel housing, rolling pins, and cutting rollers. Attachments included in the kit: 1. Pasta roller: 140 mm wide and 8 mm thick, adjustable from approximately 0.2 mm to 2 mm. 2. Spaghetti cutter: 1.6 mm thick. 3. Tagliatelle cutter: 6.3 mm wide. The adapters are only compatible with the HENDI Blackbolt planetary mixer (code: 221570).

Cast iron housing with four sturdy legs. Injection-molded splash guard and stainless steel bowl guard. Durable 10L mixing bowl made of AISI 201 stainless steel. Supplied with AISI 430 stainless steel accessories: a whisk, a flat beaker, and a dough hook. High-performance worm gear drive made of chromed steel and bronze gears. Analogue controls with 3-speed settings: 148, 244, and 480 rpm. Maximum dry flour load: 2.5 kg. Maximum dough load: 4 kg. The bowl is positioned with a lever. Protected from operation without a correctly positioned bowl or bowl lid. Resettable overheat protection. Weight: 53 kg.